Defnyddiwr:Rhyshuw1/Anghyflawn

Electric lights are used both at night and to provide additional light during the daytime. These lights are normally powered by the electric grid, but some run on local generators, and emergency generators serve as backups in hospitals and other locations where a loss of power could be catastrophic. Battery-powered lights, usually called "flashlights" or "torches", are used for portability and as backups when the main lights fail.

Defnyddir goleuadau trydanol yn ystod y nos ac ar gyfer golau ychwanegol yn ystod y dydd. Pwerir y goleuadau yma fel arfer gan y grid trydanol.

Types

Types of electric lighting include:

incandescent light bulbs
arc lamps
gas discharge lamps, e.g., fluorescent lights and compact fluorescent lamps, neon lamps, flood lamps, modern photographic flashes
lasers
light-emitting diodes, including OLEDs
sulfur lamps

Different types of lights have vastly differing efficiencies anad color of light. [1]

Name	optical spectrum	nominal efficiency (lm/W)	Lifetime (MTBF) (hours)	Color temperature (kelvins)	Color	Color rendering index
Incandescent light bulb	continuous	12-17	1000-2500	2700	Warm white (yellowish)	100
Halogen lamp	continuous	16-23	3000-6000	3200	Warm white (yellowish)	100
Fluorescent lamp	mercury line + phosphor	52-100	8000-20000	2700-5000^*	White (with a tinge of green)	15-85
Metal halide lamp	quasi-continuous	50-115	6000-20000	3000-4500	Cold White	65-93
Sulfur lamp	continuous	80-110	15000-20000	6000	Pale green	79
high pressure sodium	broadband	55-140	10000-40000	1800-2200^*	Pinkish orange	0-70
low pressure sodium	narrow line	100-200	18000-20000	1800^*	Yellow, virtually no color rendering	0

^*Color temperature is defined as the temperature of a black body emitting a similar spectrum; these spectra are quite different from those of black bodies.

The most efficient source of electric light is the low-pressure sodium lamp. It produces an almost monochromatic orange light, which severely distorts color perception. For this reason, it is generally reserved for outdoor public lighting usages. Low-pressure sodium lights are favoured for public lighting by astronomers, since the light pollution that they generate can be easily filtered, contrary to broadband or continuous spectra.

Incandescent light bulb

Prif: Incandescent light bulb

Incandescent light bulb as we know it today, with a coiled filament of tungsten, was commercialized in the 1920s developed from the carbon filament lamp introduced in about 1880. As well as bulbs for normal illumination, there is a very wide range, including low voltage, low-power types often used as components in equipment, but now largely displaced by LEDs

There is currently interest in banning some types of filament lamp in some countries, such as Australia planning to ban standard incandescent light bulbs by 2010, because they are inefficient at converting electricity to light. Sri Lanka has already banned importing filament bulbs because of high use of electricity and less light. Less than 3% of the input energy is converted into usable light. Nearly all of the input energy ends up as heat that, in warm climates, must then be removed from the building by ventilation or air conditioning, often resulting in more energy consumption. In colder climates where heating and lighting is required during the cold and dark winter months, the heat byproduct has at least some value.

Halogen lamp

Prif: Halogen lamp

Halogen lamps are usually much smaller than standard incandescents, because for successful operation a bulb temperature over 200 °C is generally necessary. For this reason, most have a bulb of fused silica (quartz), but sometimes aluminosilicate glass. This is often sealed inside an additional layer of glass. The outer glass is a safety precaution, reducing UV emission and because halogen bulbs can occasionally explode during operation. One reason is if the quartz bulb has oily residue from fingerprints. The risk of burns or fire is also greater with bare bulbs, leading to their prohibition in some places unless enclosed by the luminaire.

Those designed for 12 V or 24 V operation have compact filaments, useful for good optical control, also they have higher efficacies (lumens per watt) and better lives than non halogen types. The light output remains almost constant throughout life.

Fluorescent lamp

Prif: Fluorescent lamp

Fluorescent lamps have much higher efficacy than filament lamps. For the same amount of light generated, they typically use around one-quarter to one-third the power of an incandescent.

Fluorescents were mostly limited to linear and a round 'Circline' lamp until the 1980s, with other shapes never gaining much popularity. The compact fluorescent lamp (CFL) was commercialized in the early 1980s.

Most CFLs have a built-in electrical ballast and fit into a standard screw or bayonet base. Some make use of a separate ballast so that the ballast and tube can be replaced separately.

Typical average lifetime ratings for linear fluorescent tubes are 10,000 and 20,000 hours, compared to 750 hours (110 V) and 1000 hours (240 V) for filament lamps.

Some types of fluorescent lamp ballast have difficulty starting lamps in very cold conditions, so lights used outdoors in cold climates need to be designed for outdoor use to work reliably.

Fluorescents come in a range of different color temperatures. In some countries cool white (CW) is most popular, while in some, warmer whites predominate.

In America, fluorescents most often come in cool white (CW), with some home bulbs being a warm white (WW), which has a pinkish color. In between there is an "enhanced white" (EW), which is more neutral. There is also a very cold daylight white (DW). Compact fluorescent lamps are usually considered warm white, though many have a yellowish cast like an incandescent. "Warm" and "cool" are entirely relative terms and almost arbitrary so color temperature and the color rendering index (CRI) are used as absolute scales of color for fluorescents, and sometimes for other types of lighting.

LED lamp

Prif: Solid-state lighting

Solid state LEDs have been popular as indicator lights since the 1970s. In recent years, efficacy and output have risen to the point where LEDs are now being used in niche lighting applications.

Indicator LEDs are known for their extremely long life, up to 100,000 hours, but lighting LEDs are operated much less conservatively (due to high LED cost per watt), and consequently have much shorter lives.

Due to the relatively high cost per watt, LED lighting is most useful at very low powers, typically for lamp assemblies of under 10 W. LEDs are currently most useful and cost-effective in low power applications, such as nightlights and flashlights. Colored LEDs can also be used for accent lighting, such as for glass objects, and even in fake ice cubes for drinks at parties. They are also being increasingly used as holiday lighting.

LED efficacies vary over a very wide range. Some have lower efficacy than filament lamps, and some significantly higher. LED performance in this respect is prone to being misinterpreted, as the inherent directionality of LEDs gives them a much higher light intensity in one direction per given total light output.

Single color LEDs are well developed technology, but white LEDs at time of writing still have some unresolved issues.

CRI is not particularly good, resulting in less than accurate color rendition.
The light distribution from the phosphor does not fully match the distribution of light from the LED die, so color temperature varies at differing angles.
Phosphor performance degrades over time, resulting in change of color temperature and falling output. With some LEDs degradation can be quite fast.
Limited heat tolerance means that the amount of power packable into a lamp assembly is a fraction of the power usable in a similarly sized incandescent lamp.

LED technology is useful for lighting designers because of its low power consumption, low heat generation, instantaneous on/off control, and in the case of single color LEDs, continuity of color throughout the life of the diode and relatively low cost of manufacture.

In the last few years, software has been developed to merge lighting and video by enabling lighting designers to stream video content to their LED fixtures, creating low resolution video walls.

For general domestic lighting, total cost of ownership of LED lighting is still much higher than for other well established lighting types.

Carbon arc lamp

Prif: Arc lamp

Carbon arc lamps consist of two carbon rod electrodes in open air, supplied by a current-limiting ballast. The electric arc is struck by touching the rods then separating them. The ensuing arc heats the carbon tips to white heat. These lamps have higher efficacy than filament lamps, but the carbon rods are short lived and require constant adjustment in use. The lamps produce significant ultra-violet output, they require ventilation when used indoors, and due to their intensity they need protecting from direct sight.

Carbon arc lamps operate at high powers, and had high efficacy compared to other pre-1920s light sources. They also are a point source of light. These properties made them ideally suited to search lights, follow spots and film projector lights.

Their need for ongoing attendance and adjustment, and frequent rod replacement made them ill suited to general lighting, though they were used for high power lighting in the years when nothing else with comparable output power existed. Carbon arcs fell out of use even for niche applications during and after World War 2.

Discharge lamp

A discharge lamp has a glass or silica envelope containing two metal electrodes separated by a gas. Gases used include, neon, argon, xenon, sodium, metal halide, and mercury.

The core operating principle is much the same as the carbon arc lamp, but the term 'arc lamp' is normally used to refer to carbon arc lamps, with more modern types of gas discharge lamp normally called 'discharge lamps'.

With some discharge lamps, very high voltage is used to strike the arc. This requires an electrical circuit called an igniter, which is part of the ballast circuitry. After the arc is struck, the internal resistance of the lamp drops to a low level, and the ballast limits the current to the operating current. Without a ballast, excess current would flow, causing rapid destruction of the lamp.

Some lamp types contain a little neon, which permits striking at normal running voltage, with no external igniter circuitry. Low pressure sodium lamps operate this way.

The simplest ballasts are just an inductor, and are chosen where cost is the deciding factor, such as street lighting. More advanced electronic ballasts may be designed to maintain constant light output over the life of the lamp, may drive the lamp with a square wave to maintain completely flicker-free output, and shut down in the event of certain faults. These more complex ballasts are chosen in the film industry for example.

Lamp life expectancy

Life expectancy is defined as the number of hours of operation for a lamp until 50% of them fail. This means that it is possible for some lamps to fail after a short amount of time and for some to last significantly longer than the rated lamp life. This is an average (median) life expectancy. Production tolerances as low as 1% can create a variance of 25% in lamp life. For LEDs, lamp life is when 50% of lamps have lumen output drop to 70% or less.

Lamps are also sensitive to switching cycles. The rapid heating of a lamp filament or electrodes when a lamp is turned on is the most stressful event on the lamp. Most test cycles have the lamps on for 3 hours and then off for 20 minutes. (Some standard had to be used since it is unknown how the lamp will be used by consumers.) This switching cycle repeats until the lamps fail and the data is recorded. If switching is increased to only 1 hour on, the lamp life is usually reduced because the number of times the lamp has been turned on has increased. Rooms with frequent switching (bathroom, bedrooms, etc.) can expect much shorter lamp life than what is printed on the box.

Vendors

Public lighting

The total amount of artificial light (especially from street light) is sufficient for cities to be easily visible at night from the air, and from space. This wasted light is the source of light pollution that burdens astronomers and others.

Human-made lights highlight particularly developed or populated areas of the Earth's surface, including the seaboards of Europe, the eastern United States, and Japan.