Nodyn:Location map

Dogfennaeth nodyn[gweld] [golygu] [hanes] [puro]

Uses Lua:

Module:Location map

This template generates a location map as a composite image consisting of a map and a location mark. Optionally a label and caption can be added.

Usage

Map image files are not accessed directly but by using an auxiliary map definition. For example, if the first unnamed parameter supplied to this template is "Japan", then this template uses the entry for Japan in Module:Location map/data/Japan if it exists, or {{Location map Japan}} otherwise, one of which contains the data needed to generate the composite image.

Please note

Assigning any value to the parameter caption causes the map to be displayed as a thumbnail image. If this parameter is not declared, the template will generate a default caption.
The coordinates are not checked. If the coordinates specified fall outside the area covered by the map image, the location mark will not display inside the image; however, it may be displayed somewhere else on the page.
Do not use px. Using width=200px will usually cause a very large map to be displayed. Use width=200.
To create a map with more than one location mark use {{Location map+}} or {{Location map many}}.

Blank templates

[[File:Nodyn:Location map USA|320px|Location map is located in Nodyn:Location map USA]]
<div style="position: absolute; z-index: 2; top: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; left: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; height: 0; width: 0; margin: 0; padding: 0;"><div style="position: relative; text-align: center; left: -Gwall mynegiad: Heb adnabod y nod atalnodi "[".px; top: -Gwall mynegiad: Heb adnabod y nod atalnodi "[".px; width: Nodyn:Location map USApx; font-size: Nodyn:Location map USApx;">

Location of Yellowstone in the northwestern United States

Decimal degrees

Degrees, minutes, seconds

{{Location map
| {{{1}}}
| width      = 
| float      = 
| border     = 
| caption    = 
| alt        = 
| relief     = 
| AlternativeMap = 
| overlay_image = 
| label      = 
| label_size = 
| position   = 
| background = 
| mark       = 
| marksize   = 
| link       = 
| lat_deg    = 
| lon_deg    = 
}}

{{Location map
| {{{1}}}
| width      = 
| float      = 
| border     = 
| caption    = 
| alt        = 
| relief     = 
| AlternativeMap = 
| overlay_image = 
| label      = 
| label_size = 
| position   = 
| background = 
| mark       = 
| marksize   = 
| link       = 
| lat_deg    = 
| lat_min    = 
| lat_sec    = 
| lat_dir    = 
| lon_deg    = 
| lon_min    = 
| lon_sec    = 
| lon_dir    = 
}}

Parameters

Map display parameters
Parameter	Description
`{{{1}}}`	Required. Use the name of the map as the first unnamed parameter. For example, specifying England will use the values for England in Module:Location map/data/England if it exists, or {{Location map England}} otherwise. See the examples below.
`width`	Determines the width of the map in pixels, overriding any default values. Do not include `px`, for example: `width=300`, not `width=300px`.
`default_width`	Determines the default width of the map in pixels, intended for use by templates e.g. place infoboxes. The default value is 240. Do not include `px`. This value will be multiplied by the `defaultscale` parameter specified in individual map templates, if it exists, in order to achieve an appropriate size for vertical maps. For example, if `default_width=200` is given, a map of Thailand will be displayed with a width of 200 * 0.57 = 114 pixels (as specified in Template:Location map Thailand).
`float`	Specifies the position of the map on the page. Valid values are `left`, `right`, `center` and `none`. The default is `right`.
`border`	Specifies the color of the 1px map border. The default is lightgrey (see web colors). If set to `none`, no border will be generated. This parameter is seldom used.
`caption`	The text of a caption to be displayed below the map. Specifying a caption will cause the map to be displayed with a frame. If `caption` is defined but is not assigned a value, the map will not be framed and no caption will be displayed. If `caption` is not defined, the map will not be framed and a default caption will be generated. The default caption is created from the `label` parameter (or the current page name if label not defined) and the `name` parameter from map definition template. See the examples below.
`alt`	Alt text for map; used by screen readers, see WP:ALT.
`relief`	Any non-blank value (1, yes, etc.) will cause the template to display the map specified in the map definition template as `image1`, which is usually a relief map. See the example at Location map+/relief.
`AlternativeMap`	Allows the use of an alternative map. The image must have the same edge coordinates as the location map template. See the example at Location map+/AlternativeMap.
`overlay_image`	Allows an overlay to be superimposed on the map. This parameter is seldom used. See the example at Location map+/overlay.
Label and mark parameters
Parameter	Description
`label`	The text of the label to display next to the mark. A wiki link can be used. The default if not specified is no label, just the marker.
`label_size`	The font size to use for the label, given as a percentage of the normal font size (<100 = smaller, >100 = larger). The default is 90. Do not include `%`, for example: `label_size=80`, not `label_size=80%`. If set to 0, the label is only displayed when the user hovers over the mark.
`label_width`	The width to use for the label, given as an em size. The default is 6. Do not include `em`, for example: `label_width=7`, not `label_width=7em`.
`position`	The position of the label relative to the mark. Valid values are `left`, `right`, `top`,`bottom` and `none`. This defaults to either `left` or `right`, depending on the coordinates of the marker and its position relative to the right border of the map image. When `position=none` any defined label will not be displayed with the mark, but it will be used to create the default caption.
`background`	The background color to use for the label. See Web colors. The default is no background color, which shows the map image behind the label.
`mark`	The name of an image to display as the mark. The default is Red pog.svg (). See examples at Commons:Location markers and Commons:Category:Map icons.
`marksize`	The size of the mark in pixels. The default is 8. Do not include `px`, for example: `marksize=10`, not `marksize=10px`.
`link`	Specifies a wiki link which will be followed if the reader clicks on the mark. Do not include `[[]]`, for example: `link=Yellowstone National Park`, not `link=[[Yellowstone National Park]]`.
`lat_deg`	Required. The degrees of latitude. This value can be specified using decimal degrees and when this format is used minutes and seconds should not be specified.
`lat_min`	The minutes of latitude.
`lat_sec`	The seconds of latitude. Usually not necessary.
`lat_dir`	N if north (default value) or S for south of the Equator. Other values will be disregarded. Not required if using signed decimal degrees (i.e. negative numbers for southern latitude).
`lon_deg`	Required. The degrees of longitude. This value can be specified using decimal degrees and when this format is used minutes and seconds should not be specified.
`lon_min`	The minutes of longitude.
`lon_sec`	The seconds of longitude. Usually not necessary.
`lon_dir`	E for east (default value) or W for west of the Prime Meridian. Other values will be disregarded. Not required if using signed decimal degrees (i.e. negative numbers for western longitude).

Available maps

There are over 1000 maps available. To find other maps:

Special:PrefixIndex/Module:Location map/data/ - Checked before a map template is searched for. New maps should be created here rather than creating new templates.
Template:Location map/List - some of the items listed here are redirects and a few templates may not function as expected
Category:Location map templates - templates sorted by category
Special:WhatLinksHere/Template:Location map/Info - a search that might help
Special:Prefixindex/Template:Location map - another search that might help

Creating new map definitions

See Creating a new map definition.

Examples

Default width and float, no label, default caption (decimal coordinates)

Note: When a label is not specified, the default caption is "Page name (Map name)", so if this example was viewed on a page named Pag, the default caption would be "Pag (Croatia)". Likewise, on a page named Pag (town), the default caption would be "Pag (town) (Croatia)".

[[File:Nodyn:Location map Croatia|210px|Pag is on an island.]]
<div style="position: absolute; z-index: 2; top: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; left: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; height: 0; width: 0; margin: 0; padding: 0;"><div style="position: relative; text-align: center; left: -Gwall mynegiad: Heb adnabod y nod atalnodi "[".px; top: -Gwall mynegiad: Heb adnabod y nod atalnodi "[".px; width: Nodyn:Location map Croatiapx; font-size: Nodyn:Location map Croatiapx;">

Location map (Nodyn:Location map Croatia)

{{Location map | Croatia
| alt     = Pag is on an island.
| lat_deg = 44.44
| lon_deg = 15.05
}}

Map with the default caption (degrees/minutes)

Note: When a label is specified, the default caption is "Label text (Map name)", seen as "Pag (Croatia)" in this example.

[[File:Nodyn:Location map Croatia|200px|Pag is on an island.]]
<div style="position: absolute; z-index: 2; top: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; left: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; height: 0; width: 0; margin: 0; padding: 0;"><div style="position: relative; text-align: center; left: -Gwall mynegiad: Heb adnabod y nod atalnodi "[".px; top: -Gwall mynegiad: Heb adnabod y nod atalnodi "[".px; width: Nodyn:Location map Croatiapx; font-size: Nodyn:Location map Croatiapx;">

Pag

Pag (Nodyn:Location map Croatia)

{{Location map | Croatia
| width = 200
| float = right
| alt = Pag is on an island.
| label = Pag
| position = right
| mark = Green pog.svg <!--green dot-->
| lat_deg = 44 | lat_min = 26 <!-- default: lat_dir = N -->
| lon_deg = 15 | lon_min = 3  <!-- default: lon_dir = E -->
}}

When |position=none, the label text is not displayed next to the mark but is still used in the default caption and default alt text.

[[File:Nodyn:Location map Croatia|200px|Pag is located in Nodyn:Location map Croatia]]
<div style="position: absolute; z-index: 2; top: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; left: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; height: 0; width: 0; margin: 0; padding: 0;"><div style="position: relative; text-align: center; left: -Gwall mynegiad: Heb adnabod y nod atalnodi "[".px; top: -Gwall mynegiad: Heb adnabod y nod atalnodi "[".px; width: Nodyn:Location map Croatiapx; font-size: Nodyn:Location map Croatiapx;">

Pag (Nodyn:Location map Croatia)

{{Location map | Croatia
| width = 200
| float = right
| label = Pag
| position = none
| mark = Green pog.svg <!--green dot-->
| lat_deg = 44 | lat_min = 26 <!-- default: lat_dir = N -->
| lon_deg = 15 | lon_min = 3  <!-- default: lon_dir = E -->
}}

Mark outside of map border, no caption

[[File:Nodyn:Location map Croatia|200px|Rimini in Italy (outside the map)]]
<div style="position: absolute; z-index: 2; top: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; left: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; height: 0; width: 0; margin: 0; padding: 0;"><div style="position: relative; text-align: center; left: -Gwall mynegiad: Heb adnabod y nod atalnodi "[".px; top: -Gwall mynegiad: Heb adnabod y nod atalnodi "[".px; width: Nodyn:Location map Croatiapx; font-size: Nodyn:Location map Croatiapx;">

Rimini

{{Location map | Croatia
| width    = 200
| float    = right
| caption  =
| alt      = Rimini in Italy (outside the map)
| lat_deg  = 44.05
| lon_deg  = 12.57 <!--outside map's left border at 13.1-->
| outside  = 1 <!-- we're aware the point is outside the map, so suppress the warning category -->
| label    = Rimini
| position = right
}}

Caption, label_size, background, mark, marksize

[[File:Nodyn:Location map Italy|200px|Map of Italy with mark showing location of Rimini]]
<div style="position: absolute; z-index: 2; top: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; left: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; height: 0; width: 0; margin: 0; padding: 0;">

Rimini

Location of Rimini in Italy

{{Location map | Italy
| width      = 200
| float      = right
| caption    = Location of Rimini in Italy
| alt        = Map of Italy with mark showing location of Rimini
| label      = Rimini
| label_size = 150 <!--150% of normal size-->
| position   = bottom
| background = orange
| mark       = Orange_pog.svg
| marksize   = 12 <!--size in pixels-->
| lat_deg    = 44.05
| lon_deg    = 12.57
}}

AlternativeMap parameter

<div style="font-size: 90%; line-height: 110%; position: relative; top: -1.5em; width: 6em; Gweithredydd < annisgwyl">Rome

Location of Rome in Italy

{{Location map | Italy
| AlternativeMap = Italy location map.svg
| width   = 200
| float   = right
| caption = Location of Rome in Italy
| alt     = Map of Italy with mark showing location of Rome
| label   = Rome
| lat_deg = 41.9
| lon_deg = 12.5
}}

Relief parameter

Also demonstrates automatic positioning of label to the left, due to far right position of mark.

[[File:Nodyn:Location map Nepal|210px|Biratnagar Airport is located in southeastern Nepal]]
<div style="position: absolute; z-index: 2; top: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; left: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; height: 0; width: 0; margin: 0; padding: 0;">

<div style="font-size: 90%; line-height: 110%; position: relative; top: -1.5em; width: 6em; Gweithredydd < annisgwyl">Biratnagar

Location of Biratnagar Airport in Nepal

{{Location map | Nepal
| relief = yes
| caption = Location of Biratnagar Airport in Nepal
| alt = Biratnagar Airport is located in southeastern Nepal
| label = Biratnagar
| mark = Airplane silhouette.svg
| marksize = 10
| lat_deg = 26 | lat_min = 28 | lat_sec = 53 | lat_dir = N
| lon_deg = 87 | lon_min = 15 | lon_sec = 50 | lon_dir = E
}}

[[File:Nodyn:Location map Nepal|210px|Biratnagar Airport is located in southeastern Nepal]]
<div style="position: absolute; z-index: 2; top: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; left: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; height: 0; width: 0; margin: 0; padding: 0;">

<div style="font-size: 90%; line-height: 110%; position: relative; top: -1.5em; width: 6em; Gweithredydd < annisgwyl">Biratnagar

Location of Biratnagar Airport in Nepal

{{Location map | Nepal
| relief = 
| caption = Location of Biratnagar Airport in Nepal
| alt = Biratnagar Airport is located in southeastern Nepal
| label = Biratnagar
| mark = Airplane silhouette.svg
| marksize = 10
| lat_deg = 26 | lat_min = 28 | lat_sec = 53 | lat_dir = N
| lon_deg = 87 | lon_min = 15 | lon_sec = 50 | lon_dir = E
}}

Same coordinates on different maps

[[File:Nodyn:Location map UK Scotland|180px|Lockerbie is in southern Scotland.]]
<div style="position: absolute; z-index: 2; top: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; left: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; height: 0; width: 0; margin: 0; padding: 0;">

<div style="font-size: 90%; line-height: 110%; position: relative; top: -1.5em; width: 6em; Gweithredydd < annisgwyl">Lockerbie

Lockerbie in Scotland, UK

{{Location map | UK Scotland
| relief = 1
| width = 180
| float = right
| caption = Lockerbie in Scotland, UK
| alt = Lockerbie is in southern Scotland.
| label = Lockerbie
| mark = Blue_pog.svg
| marksize = 9
| lat_deg = 55 | lat_min = 07 | lat_sec = 16 | lat_dir = N
| lon_deg = 03 | lon_min = 21 | lon_sec = 19 | lon_dir = W
}}

Lockerbie

Lockerbie in Scotland, UK

{{Location map | United Kingdom
| relief = 1
| width = 180
| float = right
| caption = Lockerbie in Scotland, UK
| alt = Lockerbie is in southern Scotland.
| label = Lockerbie
| mark = Blue_pog.svg
| marksize = 9
| lat_deg = 55 | lat_min = 07 | lat_sec = 16 | lat_dir = N
| lon_deg = 03 | lon_min = 21 | lon_sec = 19 | lon_dir = W
}}

Map that crosses 180° meridian

See Category:Location map templates crossing 180th meridian

[[File:Nodyn:Location map Fiji|180px|Suva is located in Nodyn:Location map Fiji]]
<div style="position: absolute; z-index: 2; top: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; left: Gwall mynegiad: Heb adnabod y nod atalnodi "[".%; height: 0; width: 0; margin: 0; padding: 0;">

Suva

Suva (Nodyn:Location map Fiji)

{{Location map | Fiji
| width      = 180
| float      = right
| label      = Suva
| position   = right
| background = yellow
| mark       = Locator_Dot.png
| marksize   = 7
| lat_deg =  18 | lat_min =  8 | lat_sec = 0 | lat_dir = S
| lon_deg = 178 | lon_min = 26 | lon_sec = 0 | lon_dir = E
}}

Template data

This is the TemplateData documentation for the template used by the new VisualEditor.

Location map

This template places a location mark on a map.

Paramedrau'r nodyn[Edit template data]
Paramedr		Disgrifiad	Math	Statws
Map name	`1`	The name of the map to be used	Llinyn	angenrheidiol
Map width	`width`	Determines the width of the map in pixels, overriding any default values. Do not include "px", for example: "300", not "300px".	Rhif	dewisol
Default width	`default_width`	Determines the default width of the map in pixels, intended for use by templates such as infoboxes. The default value is 240. Do not include "px". This value will be multiplied by the defaultscale parameter specified in individual map templates, if it exists, in order to achieve an appropriate size for vertical maps.	Rhif	dewisol
Position	`float`	Specifies the position of the map on the page. Valid values are left, right, center and none. The default is right.	Llinyn	dewisol
Border color	`border`	Specifies the color of the map border. If set to none, no border will be generated.	Llinyn	dewisol
Map caption	`caption`	The text of a caption to be displayed below the map. If caption is defined but is not assigned a value, the map will not be framed and no caption will be displayed. If caption is not defined, the map will not be framed and a default caption will be generated.	Llinyn	dewisol
Alt text	`alt`	Alt text for map; used by screen readers.	Llinyn	dewisol
Alternative map from template	`relief`	Any non-blank value (1, yes, etc.) will cause the template to display the map specified in the map definition template as image1, which is usually a relief map.	Llinyn	dewisol
Alternative map not from template	`AlternativeMap`	Allows the use of an alternative map. The image must have the same edge coordinates as the map template.	Llinyn	dewisol
Overlay image	`overlay_image`	Allows an overlay to be superimposed on the map. This parameter is seldom used.	Llinyn	dewisol
Marker label	`label`	The text of the label to display next to the mark. A wiki link can be used.	Llinyn	dewisol
Label size	`label_size`	The font size to use for the label, given as a percentage of the normal font size. Do not include "%".	Rhif	dewisol
Label width	`label_width`	The width to use for the label, given as an em size. Do not include "em".	Rhif	dewisol
Label position	`position`	The position of the label relative to the mark. Valid values are left, right, top, bottom and none. This defaults to either left or right, depending on the coordinates of the marker and its position relative to the right border of the map image. When position=none any defined label will not be displayed with the mark, but it will be used to create the default caption.	Llinyn	dewisol
Label background	`background`	The background color to use for the label.	Llinyn	dewisol
Marker image	`mark`	The name of an image to display as the marker.	Llinyn	dewisol
Marker size	`marksize`	The size of the mark in pixels. Do not include "px".	Rhif	dewisol
Marker link	`link`	Specifies a wiki link which will be followed if the reader clicks on the mark.	Llinyn	dewisol
Latitude degrees	`lat_deg`	The degrees of latitude. This value can be specified using decimal degrees. When this format is used minutes and seconds should not be specified.	Rhif	angenrheidiol
Latitude minutes	`lat_min`	The minutes of latitude.	Rhif	dewisol
Latitude seconds	`lat_sec`	The seconds of latitude.	Rhif	dewisol
Latitude direction	`lat_dir`	N if north or S for south of the Equator. Not required if using signed decimal degrees.	Llinyn	dewisol
Longitude degrees	`lon_deg`	The degrees of longitude. This value can be specified using decimal degrees. When this format is used minutes and seconds should not be specified.	Rhif	angenrheidiol
Longitude minutes	`lon_min`	The minutes of longitude.	Rhif	dewisol
Longitude seconds	`lon_sec`	The seconds of longitude.	Rhif	dewisol
Longitude direction	`lon_dir`	E for east or W for west of the Prime Meridian. Not required if using signed decimal degrees.	Llinyn	dewisol